Several things can cause a drain to become clogged; common culprits in the kitchen include grease, food debris, and soap residue. Soap residue, together with hair and dirt, can also accumulate in your shower drain over time.
Before getting the professionals involved, try a few different home remedies to see if you can get the clog to move. Remember that most plumbing calls involve a minor issue that escalated after the homeowner attempted to fix it themselves. Hence, step back if you believe the task necessitates more care than you could give.
Unclogging Drains with Coke
You might be surprised by this solution and can try this not-so-traditional technique to see if it helps you clear out anything from a minor clog to a significant obstruction:
- Using Coca-Cola
You can clear a clog with ease by using Coke or Pepsi. The common belief that a nail can be dissolved in a glass of Coke given enough time is probably exaggerated. Still, the potent dissolving agents in Coke make it a more effective gutter downpipe cleaner than several commercial chemicals.
First, get a two-litre Coke bottle and let it sit at room temperature for a few hours. After you have flushed it down the toilet or poured it down the drainage pipe, you should wait an hour before turning on the hot water so that it has time to fizz and perform its corrosive magic.
Phosphoric acid, which is found in sodas like Coke and Pepsi, dissolves the residue that causes drains to become clogged. Phosphoric acid is so powerful that it can dissolve lime scale and other stubborn deposits that standard cleaners can’t eliminate. If ever there was a home remedy that worked, this would be it.
- Utilizing A Plunger In The Bathtub Or Sink
When a bottle of Coke has failed to clear a clogged sink or tub, it could be time to resort to drastic measures. If you’re like most of us and have only ever used this tool to clear a clogged toilet, it might be a surprise to hear that it can be used for other clogs. If your sink overflows, fill it halfway; if your tub does, fill it no more than four to five inches.
Although this technique does the job, it can be messy if you aren’t careful. Remember to fill the plunger with water before using it. You can remove a blockage in a pipe by applying pressure with a plunger. Energy is dissipated when using a plunger that is full of air. It is more effective to use a full plunger because the water amplifies all that force as it is applied to the obstruction.
Instructions On How To Use a Plunger:
- Put the plunger over the drain.
- Quickly press and pull for about 35 seconds.
- If the water stops draining swiftly, fill the container and plunge.
- If water begins to drain quickly, you’ve got it under control.
These are effective do-it-yourself solutions for unblock drain Sydney, but if your plumbing problem is more involved than a simple clog, you should call an expert. Whenever your plumbing goes out of control, contact the professionals for help. They will look after you and your home and get things done correctly.
Read more: Why You Should Hire A Personal Driver for Your Seattle Vacation
